Este blog visa passar informações sobre cápsulas com suas respectivas agulhas, as mais modernas do mundo, fabricadas neste século para toca-discos de vinil. É sabido que há cápsulas em estoque pelo mundo inteiro, antigas, feitas com tecnologia de 30 anos atrás. Estas aqui, são tipo "Standard" (Admitem Headshell), cantilever fino, para audiofilia e sistema de indução "Moving Iron". No blog http://joaquimcapsulasmc.blogspot.com estão as moving coil, vendidas na www.needledoctor.com
Nota: Leitores, fui plagiado em livro e que esta será a razão da minha
retirada do mundo virtual. No entanto, algumas atualizações necessárias
as farei com data e firma reconhecida e serão postadas como foto. E
todos meus trabalhos serão publicados em cartório de títulos e
documentos. (Em 19/03/2014). Calcule assim: Faça uma média da quantidade de horas mensais em que você escuta seus vinis. Obs.: Fiz uma pesquisa junto a fabricantes internacionais e houve uma certa disparidade de sugestões, de 500-800 horas, chegando até 2.500 horas (Os e-mails enviados aos fabricantes estão guardados). Pela prudência e pelo fato de que sulcos de vinis quando estragam por uso de agulha gasta, não há mais jeito, sugiro a troca pela sugestão mais prudente de 500 a 800 horas, atentando inteligentemente que: Uma agulha se troca, um vinil, não. Um sulco de um vinil raro destruído, acabou! Acabou-se o som maravilhoso! (Atualizado em 09/02/2011).
sexta-feira, 14 de agosto de 2009
Audio-Technica 120E Cartridge
Dual Moving Magnet Vector-Aligned Dual Magnet design and Audio Technica's exclusive Paratoroidal signal Generator.
This unique signal generating system is composed of a unified, laminated coil core wound with a single piece of wire. Internal mechanical and electrical connections are eliminated, minimizing magnetic losses and assuring better signal transfer. The use of PCOCC wire (Pure copper by Ohno Continuous casting), a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced paratoroidal coil design. Thus, the coil of the cartridge transmits distortion-free sound in which even the most subtle sonic details are reproduced with clarity and purity.
The half-inch standard mount AT-120E/T cartridge has gained a loyal following among audiophiles. It is extraordinarily crafted and provides musical enjoyment far beyond its price range. After about 100 hours of break-in, the AT-120E/T metamorphoses into a skilled artisan. You'll enjoy its cohesion, wide soundstage, tight bass and crystalline highs.
What's the difference between a Moving Magnet and Moving Coil Phono Cartridge? (Diferenças entre as cápsulas de magneto móvel e as de bobina móvel).
There are two types of phono cartridges, moving magnet and moving coil. The two types have different designs and performance characteristics. It all starts with the stylus or needle on the phono cartridge. The stylus travels through the grooves on the record moving horizontally and vertically, tracking the minute fluctuations in the groove that represents the music on the record. As it travels, the stylus creates a small audio signal generated by the proximity of a magnet and a coil. All phono cartridges have magnets and a coil – the difference is where they are located.
The advantages of a moving magnet cartridge are high output, which means it is compatible with any phono input on a stereo component. Many moving magnet cartridges also feature a removable and replaceable stylus. This is important in the event of breakage.
Its disadvantages are that the magnets have higher weight or mass compared to a moving coil cartridge, which means they can't move as quickly in the record groove. This inhibits its ability to track subtle changes within the groove. This is where a moving coil cartridge has performance advantages.
Moving Coil Cartridge
A moving coil cartridge is sort of the opposite of a moving magnet cartridge. Instead of magnets, two small coils are connected to the end of stylus located in the body of the cartridge. The coils are smaller than magnets and weigh much less, giving the stylus more agility when navigating the constantly changing record grooves. In general, a moving coil cartridge traces the grooves better because of its lower mass and provides more detailed and accurate sound quality.
One disadvantage of the moving coil cartridge is that it generates a smaller voltage and requires a secondary preamplifier, sometimes known as a head amp. The head amp increases the voltage enough for a phono input on a stereo component. Some moving coil cartridges have higher output and are compatible with a standard phono input, but its output will be somewhat lower than a moving magnet cartridge.
The stylus is also not user replaceable in a moving coil cartridge and must be replaced at the factory or the entire cartridge discarded if the stylus is broken.
Both types of phono cartridges will provide good performance, but if you want the best, select a moving coil cartridge.
Dual Moving MagnetVector-Aligned Dual Magnet design and Audio Technica's exclusive Paratoroidal signal Generator.This unique signal generating system is composed of a unified, laminated coil core wound with a single piece of wire. Internal mechanical and electrical connections are eliminated, minimizing magnetic losses and assuring better signal transfer. The use of PCOCC wire (Pure copper by Ohno Continuous casting), a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced paratoroidal coil design. Thus, the coil of the cartridge transmits distortion-free sound in which even the most subtle sonic details are reproduced with clarity and purity.
Technical details:
· Output: 3.5mV RMS at 5 cm/sec · Stylus:Diamond shape, Elliptical. · Cantilever: Alloy tube. · Frequency Range: 20hz to 22 KHz · Tracking Force: 1.0 –2.0 g · Weight: 6.6g · Stereo Channel Balance: 1.5 dB · Channel Separation: 1 kHz – 22/17 dB · Recommended Load: 47 kilohms in parallel with 250 pf. · Stylus Construction: Bounded Rank Shank · Stylus Tip: Side x front radii: 0.4 x 0.7 mil The half-inch standard mount AT-71E cartridge sounds rich, balanced and crystal clean. It allows discerning music lovers to attain extraordinary listening pleasure without the lofty expenditure typically associated with high performance cartridges. And yes it is exquisite. The AT71E is rated a "Best Buy" in the UK and we agree wholeheartedly.
The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.Model 78EThe Prestige model 78E uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical 3 mil. diamond mounted in a brass bushing.Model 78C The Prestige model 78C uses a three-piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished conical/spherical 3 mil. diamond mounted in a brass bushing. 78C & 78E Technical Specifications: · Frequency Response 10 hz~50 Khz · Principal MI · Imput Load 47K · Output at 1KHz 5CM/sec. 5mV · Recommended Tracking Force 2-5 · Stylus Type - 78C C · Stylus Type - 78E E · Inductance 45mH · Resistance 475 · Compliance CUs · Stylus Replacement U=user U
· Recommended size for Edison Diamond Disc and 1920's and 30's records is 3.5 mil.For the raw aluminum and 1930 RCA pre-grooved disks use 4.0 mil.
Grado Cartridges Superior Design & Precision FabricationAll Grado cartridges now use a derivation of the moving iron principle which feature patented OPTIMIZED TRANSMISSION LINE cantilever technology, PIVOTED FIXED AXIAL STYLUS-GENERATOR MODULE, and Grado's FLUX-BRIDGER GENERATOR SYSTEM.
The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.Model 78EThe Prestige model 78E uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical 3 mil. diamond mounted in a brass bushing.Model 78C The Prestige model 78C uses a three-piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished conical/spherical 3 mil. diamond mounted in a brass bushing. 78C & 78E Technical Specifications: · Frequency Response 10 hz ~50 Khz · Principal MI · Imput Load 47K · Output at 1KHz 5CM/sec. 5mV · Recommended Tracking Force 2-5 · Stylus Type - 78C C · Stylus Type - 78E E · Inductance 45mH · Resistance 475 · Compliance CUs · Stylus Replacement U=user U Price: U$$150,00. (August, 13, 2009).
Features, Specifications, Review Quotes Of Grado 78-RPM Cartridges · Grado 78-RPM styli are available by special order in the following conical/spherical sizes: 2.0 mil 2.5 mil 3.5 mil 4.0 mil · Recommended size for Edison Diamond Disc and 1920's and 30's records is 3.5 mil. For the raw aluminum and 1930 RCA pre-grooved disks use 4.0 mil.
All Grado cartridges now use a derivation of the moving iron principle which feature patented OPTIMIZED TRANSMISSION LINE cantilever technology, PIVOTED FIXED AXIAL STYLUS-GENERATOR MODULE, and Grado's FLUX-BRIDGER GENERATOR SYSTEM.
Nagaoka MP-100 Phono Cartridge
Nagaoka Orthodox type; Sharp and lively sound; “Mischievous youngest brother” Cost-effective, high-performanceClear sound reproductionIdeal for pop and jazz Nagaoka MP-100 Features: Superfine polished conical bonded stylus tip Powerful Samarium cobalt magnet Lightweight aluminum alloy cantilever Carbon-fiber-reinforced plastic pole shoe Anti-ferro-magnetic permalloy shield casingNagaoka MP-100 Cartridge Specifications: Stylus Type: Elliptical (.6mil, Spherical bonded diamond) Cantilever: Aluminium alloy Frequency Range: 20Hz - 20.000Hz Compliance: xxµm/mN Output Voltage: 5,0mV Tracking Force Recommended: 1,8 - 2,3g (13 - 18mN) Type: MM / Moving Magnet Type: Half-inch mount Weight: 6,5gPrice: U$$79,00 (August, 13, 2009).
